Opened 7 years ago

Closed 7 years ago

#1012 closed help (fixed)

Build failed when using my own branch

Reported by: ear5as Owned by: ros
Component: UM Model Keywords:
Cc: Platform: MONSooN
UM Version: 7.3

Description

Hello,
I created a branch at vn7.3 and merged with a branch (vn7.3_HG3r2_mergCJ_nprim_Radv2). I was able to run a job that used the original branch (of Mohit) (see job xidaa) but I am unable to run a job that points to my checked out branch. The job that fails to build is "xidac" and the comp.leave file can be found here:

/home/aschmi/output/xidac000.xidac.d13025.t105626.comp.leave

Could you please take a look at the error message?

Thanks for your help.
Anja

Change History (7)

comment:1 Changed 7 years ago by ros

Hi Anja,

Please try just resubmitting the job to compile. It looks like FCM has got itself a little confused. I took a copy of your job and it has compiled successfully.

Regards,
Ros.

comment:2 Changed 7 years ago by ear5as

Hi Ros,

thanks for taking a look at this. Unfortunately, I still can't compile the job successfully. I get the same error as beforehand.

/home/aschmi/output/xidac000.xidac.d13025.t132702.comp.leave

Anja

comment:3 Changed 7 years ago by ros

Hi Anja,

Try forcing a full extract and build of the code by switching on Force FULL Extract and Force FULL Build in the UMUI window FCM Configuration → FCM Extract and Build and Output Levels and resubmitting.

Regards,
Ros.

comment:4 Changed 7 years ago by ear5as

Hi Ros,

thank you. The model does compile okay now. For future runs, should I have "Force full extract" and "force full build" switched on? Or is it just a matter of switching this on when compiling a newly created branch for the first time?

Thanks for your help.
Anja

comment:5 Changed 7 years ago by ros

  • Owner changed from um_support to ros
  • Status changed from new to accepted

Hi Anja,

Using "Force FULL extract" / "Force FULL build" basically ensures all source code
is fully rebuilt cleanly. I.e. it deletes everything and extracts and builds from scratch rather than doing an incremental extract/build which only updates/compiles those files that have been modified since the last time you compiled. Generally these options should be left disabled as fully rebuilding code each time is not efficient. I would only recommend switching these options on as a last resort if you have unexplained problems with your extract/build.

Hope that helps.
Regards,
Ros.

comment:6 Changed 7 years ago by ear5as

Hi Ros,
yes, that makes sense. Thanks so much for your help.
Anja

comment:7 Changed 7 years ago by ros

  • Resolution set to fixed
  • Status changed from accepted to closed
Note: See TracTickets for help on using tickets.