Opened 3 years ago

Closed 2 years ago

#2160 closed help (answered)

vn8.4 Job failing to reconfigure

Reported by: webber24 Owned by: um_support
Component: UKCA Keywords:
Cc: Platform: ARCHER
UM Version: 8.4

Description

Hi,

Am trying to get a vn8.4 job (xngxc) to reconfigure and was wondering whether you could help decipher the problem.

The error I get in the rcf.leave file:

?????????????????????????????????????????????????
???!!!???!!!???!!!??? ERROR ???!!!???!!!???!!!???
? Error in routine: Rcf_Calc_Len_Ancil
? Error Code: 1
? Error Message: StashCode? is not a valid prognostic variable, Stash Code 30
? Error generated from processor: 0
? This run generated 31 warnings
?????????????????????????????????????????????????

Am I right in thinking that this refers to the land/sea mask?

Thanks,

Chris

Change History (3)

comment:1 Changed 3 years ago by willie

  • Component changed from UM Model to UKCA

Hi Chris,

It is more likely not to be, but one of the following

1|    1 |    0 |   30 |LAND MASK (No halo) (LAND=TRUE)     |
1|    1 |   20 |   30 |CONTRAIL - UPPER LIMIT              |
1|    1 |   31 |   30 |DMS BOUNDARY VALUE                  |
1|    1 |   32 |   30 |DMS BV OUT                          |
1|    1 |   33 |   30 |ATM TRACER 30               AFTER TS|
1|    1 |   34 |   30 |MACR MASS MIXING RATIO AFTER TSTEP  |
1|    1 |   36 |   30 |ATM TRACER  30 LATERAL BOUNDARY VAL.|
1|    1 |   37 |   30 |UKCA TRACER 30 LATERAL BOUNDARY VAL.|

I hope that helps.

Regards
Willie

comment:2 Changed 3 years ago by willie

  • Status changed from new to pending

comment:3 Changed 2 years ago by willie

  • Resolution set to answered
  • Status changed from pending to closed
Note: See TracTickets for help on using tickets.