16:26 Ticket #1842 (HadGAM2 failing in FCM_MAIN) created by jonny
Hi, I'm trying to submit a "compile and run" job on Archer (xmodb). the …
14:56 Ticket #1841 (Ancillary Files) created by simon.tett
Hi I've got a bunch of Ancillary files I want to use to run the model …
14:20 Ticket #1647 (has NEMO3.4 been installed on the XCM?) closed by annette
fixed: I think that the OASIS paths have now been fixed properly in the config …
13:57 Ticket #1779 (UM 10.3 reconfiguration segmentation faults) closed by annette
answered: Nick, I am closing this ticket due to lack of activity. You can, of …
12:45 Ticket #1764 (basename: missing operand, ambiguous error message (urgent)) closed by ros
answered: Closing due to lack of activity.
12:37 Ticket #1793 (COSP Model Output - vn8.4) closed by ros
answered: Closed due to lack of activity.
12:27 Ticket #1811 (Archiving not working) closed by ros
answered: This is ticket is now being closed due to inactivity. If you require …
12:24 Ticket #1812 (Compiler can't find MPL) closed by ros
answered: No further activity on this ticket so now being closed.
12:22 Ticket #1815 (Start dumps request (ECMWF Op.)) closed by ros
12:21 Ticket #1817 (Model crash when outputting UM-UKCA diagnostics over a regional domain) closed by ros
11:33 Ticket #1840 (Serial Q) closed by ros
09:39 Ticket #1826 (Run will not compile: MPL error) closed by ros
09:38 Ticket #1818 (Submitting job but it doesn;t go into Q) closed by ros
09:37 Ticket #1829 (Permission denied, incorrect RSA key) closed by ros
09:36 Ticket #1833 (Compilation failure probably related to module changes) closed by ros
09:23 Ticket #1840 (Serial Q) created by simon.tett
HI, the serial Q seems to be backed up… I've got a compile job sitting …


10:18 Ticket #1839 (Odd compilation error) created by simon.tett
Hi, I'm getting the following error when I try and compile my job xlwt#s. …
08:42 Ticket #1838 (Request for UKV forecast data) created by kz821407
Do you happen to know how I would go about gain access to operational …


13:41 Ticket #1837 (Getting traceback) created by simon.tett
HI, my UM run has crashed… How do I find out where it has crashed i.e. …
11:52 Ticket #1836 (CMIP5 RCP runs) created by ucfaako
Hello, I am searching for standard CMIP5 RCP runs on the UM6.6.3 (PUMA), …
11:22 Ticket #1819 (SCM Namelist) closed by willie


07:49 Ticket #1835 (User diagnostic problems) closed by grenville


17:35 Ticket #1835 (User diagnostic problems) created by simon.tett
Hi, I've added a new user diagnostic and so have generated a new user …


17:14 Ticket #1834 (Standard GA6 N96 job terminated normally with warnings) created by rm024650
Dear CMS helpdesk I am trying to run a copy of the standard GA6 N96 job …
15:56 Ticket #1831 (small UKV data request) closed by willie


15:43 Ticket #1833 (Compilation failure probably related to module changes) created by earhg
Hi, Today I am having trouble compiling a job xmmll that worked fine, or …
12:58 Ticket #1832 (Disc quota exceeded on ARCHER) created by MikeN
Hello, I'm getting an error when running my job xlkes. The error seems to …
12:31 Ticket #1831 (small UKV data request) created by abarrett
Hi, Could you please make available the UKV multi-level data from …
10:27 Ticket #1830 (Disk Quota regularly exceeded for submission to ARCHER) closed by andy
fixed: Hi Anthony, Quota increased to 3GB. Regards Andy


13:30 Ticket #1830 (Disk Quota regularly exceeded for submission to ARCHER) created by acjones247
Hello, This is a carbon copy of ticket #766 closed help (fixed) (User …


11:53 Ticket #1829 (Permission denied, incorrect RSA key) created by dilshadshawki
Hello Helpdesk, When I try running the UM it fails after I enter my …
10:55 Ticket #1827 (A job xmbqc no longer runs (20160309)) closed by ros


14:39 Ticket #1828 (Debugging options on ARCHER compiler) created by ee10hp
Hi, Thanks for your help. I'm running a v7.3 um-ukca job on ARCHER with …
12:42 Ticket #1823 (modify_CICE_header no longer working) closed by annette
answered: No worries. Annette
11:19 Ticket #1809 (vn8.4 release job for ARCHER) closed by ros
08:49 Ticket #1813 (Insufficient amount of resource vntype) closed by willie


23:13 Ticket #1827 (A job xmbqc no longer runs (20160309)) created by markr
This job worked yesterday, I realise some work has been happening "at risk …
21:38 Ticket #1826 (Run will not compile: MPL error) created by ee10hp
Hi, My job (xmnib) compiled yesterday but an identical copy of this …
15:00 Blog: Training Course: An Introduction to the Unified Model created by ros
11:14 Ticket #1748 (My job has stopped as I have unexpectedly exceeded the time limit 10800) reopened by s.varma13
Hi Annette Thanks a lot for your message above. I have been away for the …
09:17 Ticket #1825 (Require advice on changing compiler version) created by markr
Hello, I have been advised by Cray to use a more recent version of their …


17:54 Ticket #1824 (MONC on ARCHER: Slow Writing) created by CCC_MC
I am experimenting with MONC on ARCHER. It seems like the model output is …
14:50 Ticket #1823 (modify_CICE_header no longer working) created by dilshadshawki
Hi Annette, For some reason, the modify_CICE_header tool gives me the …


10:26 Ticket #1822 (emacs on Archer) closed by andy
fixed: Hi Leighton, This should be fixed now. Please let me know if otherwise. …
08:37 Ticket #1822 (emacs on Archer) created by Leighton_Regayre
Hello, After the PUMA reboot last week I can no longer open files using …


13:06 Ticket #1820 (SSH issues PUMA-ACRHER) closed by ros
fixed: Hi Chris, We have now finished the maintenance on PUMA and ssh is now …
12:04 Ticket #1821 (Segmentation fault when trying to switch from 360-day to Gregorian ...) created by s1374103
Dear CMS, I have copied a release job, vn8.4 RJ4.0 CheST+GLOMAP-mode …
11:59 Ticket #1820 (SSH issues PUMA-ACRHER) created by webber24
Dear CMS, I have recently had issues with the ssh agent between PUMA and …
09:37 Ticket #1819 (SCM Namelist) created by DanielSmith
Dear CMS helpdesk, I have been trying to run an experiment using the SCM. …


11:04 Ticket #1818 (Submitting job but it doesn;t go into Q) created by simon.tett
Hi, I have a job (xlwt#r) which when I submit does not go into the Q. It …


10:50 Ticket #1817 (Model crash when outputting UM-UKCA diagnostics over a regional domain) created by ee10hp
Dear CMS helpdesk, Many thanks for your help. For my v7.3 UM-UKCA job …


11:41 Ticket #1816 (xancil does not convert all time dimensions) closed by jeff


17:13 Ticket #1816 (xancil does not convert all time dimensions) created by ucfaako
Hello, I've been trying to create a new vegetation disturbance ancil with …
15:16 Ticket #1815 (Start dumps request (ECMWF Op.)) created by fadzilmnor
Good afternoon, I would like to request a start dump (ECMWF operational) …
10:34 Ticket #1814 (error writing "file4": no space left on device) closed by andy
fixed: Hi Luke, Fixed. I'll check the old files removal script for /tmp and …
10:31 Ticket #1814 (error writing "file4": no space left on device) created by luke
A user in Cambridge is getting the error […] Looking at tickets #616


16:44 Ticket #1813 (Insufficient amount of resource vntype) created by ucfaako
Hello, whenever I try to run a job (that previously worked as well as new …


10:10 Ticket #1790 (SCM) closed by grenville
09:58 Ticket #1798 (model fails with bsend error) closed by grenville
answered: Working after increase of processors
09:56 Ticket #1801 (Disk space on /work [archer]) closed by grenville
completed: Finally answered this after phone-call reminder Grenville
09:54 Ticket #1804 (Archer login slow from PUMA) closed by grenville
09:53 Ticket #1808 (Automatically create SCM namelist?) closed by grenville
Note: See TracTimeline for information about the timeline view.