Version 9 (modified by simon, 5 years ago) (diff)

Standalone UM system and FAMOUS

This is a standalone version of FAMOUS based on version 4.5 of the Met Office's Unified Model (UM).

It is a complete UM system but without the need for the complicated installation process. It is linux only as it comes with pre-built small executables. It also comes with prebuilt model and reconfiguration executables. If no model code changes are needed, then the model executables can be used for model integration without the need for any compilation at all on the installation machine. The system has the flexibility for local compilation, if required. This does need extra work, however. The communications library, gcom will need installing, together with a MPI system, see below for full details.

All of the standard FAMOUS input ancillaries are supplied, together with a selection of dumps.

The UM and FAMOUS can be installed on any linux system, from laptops to clusters. Currently the only job control software supported is the at daemon. It is possible to run with other job control systems such as Sun Grid Engine and SLURM, and versions which support these will be released in the future.

This document assumes the user is familiar with the UM and umui.


Running without compilation:

  • Linux system
  • at daemon
  • ksh

Running with compilation (above plus):

  • Intel fortran
  • A MPI implementation

Quick start guide:

  1. Copy /net/jasmin/users/simon/um_famous.tgz and unpack on the machine on which you want to run FAMOUS. The system will be unpacked into a directory called um_famous
  1. Edit and append example.profile to your $HOME/.profile
  • Ensure that there is no other UM setup commands in .profile
  • UMDIR should always have um_famous at the end of the path.
  1. Then
    . $HOME/.profile
  1. On puma, copy the job xmjne (MOSESI) or xmjnf (MOSESII), save and process. The "Submit" button DOES NOT WORK. As prebuilt executables are provided, there is no need to build the model. For testing, these model configs require no further changes.
  1. On the installation machine type:
    umsubmit_local -u pumauserid runid

You may be asked for your puma password.

  1. And the model should be running. Check by:
    cd $DATA_DIR/runid
    tail -f *pe0

FAMOUS configuration


Seperate MOSESI and MOSESII.2 configurations are available. The base umui jobs can be used to build and run each of these.


The difference between MOSESI and MOSESII modsets are considerable. In fact, MOSESII code does not exist as part of the standard UM4.5 release and can only be configured as mods. Therefore it was decided that there should be different standard mods for each configuration. All of the various model mods for the two FAMOUS configurations are now held in 5 mods, these are:

FORTRAN mods which are common to both MOSESI and MOSESII
C mods which are common to both MOSESI and MOSESII
MOSESI exclusive mods
MOSESII exclusive mods
mod which allows IO on little endian machine, such as Linux. UM files are natively bigendian. It was decided to keep this separate to allow easy porting of a model configuration to a bigendian machine such as IBM Power.

Similarly there mods for the reconfiguration.

FORTRAN mods which are common to both MOSESI and MOSESII
MOSESI exclusive mods
MOSESII exclusive mods

These mods are concatenations of the standard mods for each model. The tool $UMDIR/tools/ was used for this.


The handedits where concatenated in a similar way to the modsets. There is a single handedit for each model configuration. They are ~simon/famous/ and ~simon/famous/ . The tool was used to create them. In those cases where the original handedit changed parameter values which could be set in the umui, these values where set directly in the umui and that part of the handedit discarded.


FAMOUS is configured via the umui as usual. The standard FAMOUS jobs have be rationalised to make their configuration as simple as possible.


Intel FORTRAN, MPI and gcom

The model tarball comes complete with a pre-built MPICH3.2 system. The default installation is configured to use this. If the model needs recompilation, or a different MPI system than MPICH3.2 is required to run the model (for example on some clusters), then the model needs to be recompiled on the local system. Firstly Intel FORTRAN needs to be installed. In theory it is possible for this FAMOUS version to use other compilers, but currently only Intel FORTRAN is supported. MPI has to be installed (if it hasn't been already). FAMOUS has been tested with MPICH3.2 but should work with other implementations. For MPICH3.2 follow the installation instructions at . It needs to be configured for Intel FORTRAN for both F77 and F90. Once it has been installed, add the line

export MPICH_DIR=/path/to/top/level/mpich

to your .profile, before the call to setvars, changing the path as required. If MPI is already installed, then add this line to point to the local installation.

Next gcom (the system the model uses for multi-processor communications) needs to be compiled using MPI. Type

cd $UMDIR/gcom3.8/gcom

The file $UMDIR/gcom3.8/gcom/lib/libgcom_buffered_mpi.a should now exist.

The reconfiguration and model can now be compiled as usual. The standard compile system will use the MPI version defined in MPICH_PATH and the gcom version in $UMDIR/gcom3.8/gcom/lib.

Changes from standard UM/FAMOUS

  • Linux only.
  • UM comes as a single pre-configured tarball.
  • UM installation process no longer required.
  • UM tools included in tarball.
  • Scripts are hard coded, no script mods.
  • All small executables are prebuilt as static executables.
  • All mods grouped together into a small number of files.
  • Compile system changed so that pre-built object files no longer required.
  • All handedit file collated into a single file.
  • umui jobs cleaned up.
  • umui updated to set values directly which handedits overwrote. These handedits removed.
  • umui system code updated.
  • Dumps and ancils co-located.
  • MPICH built and included with system for multi-processor models.
  • Changed paths so that only minimal only two (UMDIR DATA_DIR) need changing.
  • Ensured that system is flexible enough to allow UM experts to configure as they would a standard UM system.
  • Archiving system fully integrated with model scripts.